Energy Saving Ways of Magnetic Separator

Magnetic separator is widely used in resource recycling, wood industry, mining industry, ceramics, chemical and other factories. It is one of the most widely used equipment in aircraft industry with high versatility. This passage will introduce the energy saving ways of magnetic separation machine for you:

1. Adjust the plate height of magnetic separator.

Iron ore dry separator material separating separator directly influences the separation effect of dry magnetic separator, if the separator plate is too low, it will reduce the use rate of ore resources, if the partition board is too high, the gangue minerals thrown is not complete.

2. Adjust the distance between separation plate and magnetic drum.

The distance between the separation plate and magnetic drum is an important parameter of pre-concentration technology. If the feed spacer distance is smaller, the lean magnetite ore block does not have better recovery, which will reduce the use of ore resources rate, if the feeding distance increases, the gangue minerals can not be separated, so the grinding grade will decline, it will not play the grinding efficiency.

3. Increase the layer feeder of the material.

For the dry permanent drum magnetic separator, the cylinder surface distance is farther, the more severe the magnetic decay and the material flow through the thick will cause magnetic particles and the nonmagnetic particles mutual inclusion, which will affect the separation effect of ore. If it can realize the particles on the belt, it will be the most ideal monolayer distribution.